net localgroup administrators username /add

I just did this on Debian 9, it might work on older versions and more than likely Ubuntu Do everything as root: sudo su - Install vlan package: apt-get install vlan Load 8021q module: modprobe 8021q Add 8021q module at bootup: echo 8021q | sudo tee -a /etc/modules Make sure it is in the file: cat /etc/modules Now we need to edit the interfaces file: nano /etc/network/interfaces There will probably be something like below

open up CMD with admin privileges then type the following Enable RDP connections Set-ItemProperty ‘HKLM:\SYSTEM\CurrentControlSet\Control\Terminal Server\‘ -Name “fDenyTSConnections” -Value 0 Make Firewall rule Enable-NetFirewallRule -DisplayGroup “Remote Desktop”

You have to make sure the CMD has admin open up CMD with admin privileges then type the following net user "username" "passwd"

For some reason I couldn’t get the normal move autocomplete.dat files to appdata and rename to work. I found this workaround. There might be an easier way, but this is the way that I was able to get it to work Download nk2edit Open the stream autocomplete files in nk2Edit %LocalAppData%\Microsoft\Outlook\RoamCache\stream_Autocomplete_* Select all with ctrl+A the right click on any of them and hit “Copy with tab delimit” Open a new excel or calc workbook and paste the previous data into it Then you delete the first column.

I can never get the text to look right in wordpress. Here is the link

This data is pulled from Link. Overview: || visible in terminal || visible in file || existing Syntax || StdOut | StdErr || StdOut | StdErr || file ==========++==========+==========++==========+==========++=========== > || no | yes || yes | no || overwrite >> || no | yes || yes | no || append || | || | || 2> || yes | no || no | yes || overwrite 2>> || yes | no || no | yes || append || | || | || &> || no | no || yes | yes || overwrite &>> || no | no || yes | yes || append || | || | || | tee || yes | yes || yes | no || overwrite | tee -a || yes | yes || yes | no || append || | || | || n.

To whitelist PC in barracuda you have to create a JP Subnets/Groups. To do this you have to go to USERS/GROUPS > IP Subnets/Groups and create a Group Membership by IP. You put in the address and the netmask for a single address is 255.255.255.255. IKt wouldn’t hurt to put in the name of who this is for. Once you have that configured go to BLOCK/ACCEPT > Exceptions. Action: Allow Applies to: IP Group.

When cloning using clonezilla I notice sometimes if the PC was using UEFI it wouldn’t clone. After some googleing I was able to find a post that mentioned you had to manually copy over the bootloader. It is very simple to do. Once booted into CloneZilla you enter shell instead of the normal start. Once in the shell you’re going to become root. sudo su. Once you’re root you going to type the following command.

First we need to configure static IP address This can be done by typing the below Enter Powershell powershell.exe Change computer name Rename-Computer -NewName "NewName" Reboot shutdown -s -t 0 log back in and go to power shell powershell.exe Find interface index Get-NetAdapter Set IP Address New-NetIPAddress –InterfaceIndex 2 –IPAddress 192.168.1.16 -PrefixLength 24 -DefaultGateway 192.168.1.1 Set DNS address Set-DnsClientServerAddress -InterfaceIndex 2 -ServerAddresses 127.0.0.1 Now it’s time for the “FUN” part. Now I realize why I don’t like core server.

create public and private keys. You can just hit enter or change the options. ssh-keygen -t rsa Now we need to copy our public key to the servers authorized keys cat ~/.ssh/id_rsa.pub | ssh [email protected] "mkdir -p ~/.ssh && chmod 700 ~/.ssh && cat >> ~/.ssh/authorized_keys" Now once you’ve completed teh above you should just be able to ssh to the remote host. If you want to be able to ssh as root.

First we are going to become root sudo su Next we are going to join the realm. This should installed everything needed after you run the command below realm join domain.com --user domainadmin Permit all users to log in. realm permit --all Add user group as root nano /etc/sudoers Paste into above file %groupname@domain ALL=(ALL:ALL) ALL Allow sssd to create user directory nano /etc/pam.d/common-session Paste into above file session optional pam_mkhomedir.

Enter enable mode: en Enter Global Config (use this mode for 99% of the configuration, must be in enable mode): conf t Set port back to default default int G0/4 Encrypts all passwords on the device: service password-encryption Configure enable password (or secret in this case): enable secret ________ Create user with highest privilege: username _____ priv 15 password ______ Generate RSA key for SSH (needed if you plan to use SSH):

I am not a pro, this is just what I’ve learned over the years and noticed that a bunch of tutorials didn’t have all the info I needed/used so I figured I’d make my own. rpm -Uvh https://rpms.remirepo.net/enterprise/remi-release-7.rpm yum update yum install -y nginx mariadb-server mariadb git yum --enablerepo=remi-php72 install php-fpm php-common php-opcache php-pecl-apcu php-cli php-pear php-pdo php-mysqlnd php-pgsql php-pecl-mongodb php-pecl-redis php-pecl-memcache php-pecl-memcached php-gd php-mbstring php-mcrypt php-xml php-pecl-zip php-gmp Next we are going to want to enable everything to run on start up systemctl enable php-fpm systemctl enable nginx systemctl enable mariadb systemctl start mariadb

I DO NOT TAKE CREDIT FOR THIS I JUST FOUND IT AND PUT IT ON MY SITE. IT WAS ON A SITE CALLED cowgod.net, BUT THE SITE NO LONGER EXISTS :-( Install Need for Speed Underground and Most Wanted together If you own both Need for Speed Underground and Need for Speed Most Wanted, you’ve inevitably tried to install them together. The first game will install and play flawlessly, however, something strange happens when you run autoplay on the second game.

for f in *; do cd $f; mv * ..; cd ..; rmdir $f; done find . -type f ! -iname "*.mp4" ! -iname "*.jpg" ! -iname "*.wmv" ! -iname "*.mkv" ! -iname "*.mpg" ! -iname "*.avi" ! -iname "*.m4v" sed 's#^#what to add to begging of line#' oldfile > newfile sed 's#$#text to add to end of line#' oldfile > newfile mkvmerge -o <output>.mkv –default-track 0 –language 0:eng <subtitles>.srt input find .

Over the weekend I got attacked. I realized the cause of this was because I rebooted my server and the docker IPTables rules overwrote the IPTables-Persistent rules I had. After realizing this was the case I uninstalled docker since I wasn’t using it and while I was making firewall changes I set up ipset to block most foreign countries. I also removed IPTables-Persistent and instead just added the post up to the /etc/network/interfacespost-up ipset restore < /etc/iptables/ipset.

How I installed KodExplorer. This is running on Debian 8.1. Things might be different on whatever OS/Version you’re running. I am by no means a pro. This is pieced together from everything I’ve learned. You first have to install nginx and php apt install ngnix php5-fpm git if it’s a newer version of debian or ubuntu you might have to run apt install php7-fpm mkdir -p /etc/nginx/ssl/site.com cd /etc/nginx/ssl/site.com Fill out the info the next step asks.

I was running into an issue where when people would go to the IP of my server or a domain was pointed at my server and the domain wasn’t configured in NGINX it would for some reason redirect to one of my domains when I didn’t want it to. Below is the config block that I added to a file. This make NGINX return a 403 error when accessing the server via IP or an reconfigured domain.

Over the past couple days I’ve been trying to get a Cisco 3560 with VLANs to work. Finally I was able to get it working. This is my first blog post FYI it’s not the most detailed. It’s just info on what I’ve learned. This is not the best post to read if you have no technical knowledge. If you have some you should be able to work your way thru my horrible instructions.