net accounts /maxpwage:unlimited

Copied from LINK PUBLIKOVÁNO 23 SRP ’17 , AUTOR: TOMAS KALABIS VMware vSphere – How to activate Windows Server OEM licence in virtual machine I have installed a Windows Server 2012 R2 with a Fujitus OEM licence on ESXi 6.5, but when i try to activate this operating system i got always an error with licence key. The solution is add following lines to the .vmx file of affected VM.

Download IMGBURN Now all that’s left is to glue the iso back together. In ImgBurn this accomplished by: Mode -> Build In the ‘Source’ section, click the ‘Browse for a folder’ icon. Select c:\iso\ms-iso. In the ‘Destination’ section, click the ‘Browse for a file’ icon. Give your iso a name and put it where you’d like. Under the Options tab on the right, set ‘File System’ to ‘UDF’ and ensure that ‘Recurse Subdirectories’ is checked.

If using Debian 10 you’ll have to use the github VSL. I just started using it, I will update if there’s issues. HERE’S the link. Now we need to make the module be loaded. mkdir /lib/modules/4.19.0-10-amd64/kernel/drivers/iomem cd root/usr/src/iomemory-vsl-3.2.16 cp iomemory-vsl.ko /lib/modules/4.19.0-10-amd64/kernel/drivers/iomem Now we need to add it to be loaded on bootup nano /etc/modules Paste iomemory_vsl into the /etc/modules file. `` First go to LINK and download the needed items I also have a copy that I downloaded HERE.

As root echo "deb http://ftp.debian.org/debian stretch main contrib" >> /etc/apt/sources.list apt update apt upgrade -y reboot Now we are going to install the linux headers for the current linux version apt install linux-headers-$(uname -r) Now we are going to install zfs itself. This is going to take a while apt install zfs-dkms

net localgroup administrators username /add

I just did this on Debian 9, it might work on older versions and more than likely Ubuntu Do everything as root: sudo su - Install vlan package: apt-get install vlan Load 8021q module: modprobe 8021q Add 8021q module at bootup: echo 8021q | sudo tee -a /etc/modules Make sure it is in the file: cat /etc/modules Now we need to edit the interfaces file: nano /etc/network/interfaces There will probably be something like below

open up CMD with admin privileges then type the following Enable RDP connections Set-ItemProperty ‘HKLM:\SYSTEM\CurrentControlSet\Control\Terminal Server\‘ -Name “fDenyTSConnections” -Value 0 Make Firewall rule Enable-NetFirewallRule -DisplayGroup “Remote Desktop”

You have to make sure the CMD has admin open up CMD with admin privileges then type the following net user "username" "passwd"

When cloning using clonezilla I notice sometimes if the PC was using UEFI it wouldn’t clone. After some googleing I was able to find a post that mentioned you had to manually copy over the bootloader. It is very simple to do. Once booted into CloneZilla you enter shell instead of the normal start. Once in the shell you’re going to become root. sudo su. Once you’re root you going to type the following command.

I DO NOT TAKE CREDIT FOR THIS I JUST FOUND IT AND PUT IT ON MY SITE. IT WAS ON A SITE CALLED cowgod.net, BUT THE SITE NO LONGER EXISTS :-( Install Need for Speed Underground and Most Wanted together If you own both Need for Speed Underground and Need for Speed Most Wanted, you’ve inevitably tried to install them together. The first game will install and play flawlessly, however, something strange happens when you run autoplay on the second game.

for f in *; do cd $f; mv * ..; cd ..; rmdir $f; done find . -type f ! -iname "*.mp4" ! -iname "*.jpg" ! -iname "*.wmv" ! -iname "*.mkv" ! -iname "*.mpg" ! -iname "*.avi" ! -iname "*.m4v" sed 's#^#what to add to begging of line#' oldfile > newfile sed 's#$#text to add to end of line#' oldfile > newfile mkvmerge -o <output>.mkv –default-track 0 –language 0:eng <subtitles>.srt input find .

Over the weekend I got attacked. I realized the cause of this was because I rebooted my server and the docker IPTables rules overwrote the IPTables-Persistent rules I had. After realizing this was the case I uninstalled docker since I wasn’t using it and while I was making firewall changes I set up ipset to block most foreign countries. I also removed IPTables-Persistent and instead just added the post up to the /etc/network/interfacespost-up ipset restore < /etc/iptables/ipset.

How I installed KodExplorer. This is running on Debian 8.1. Things might be different on whatever OS/Version you’re running. I am by no means a pro. This is pieced together from everything I’ve learned. You first have to install nginx and php apt install ngnix php5-fpm git if it’s a newer version of debian or ubuntu you might have to run apt install php7-fpm mkdir -p /etc/nginx/ssl/site.com cd /etc/nginx/ssl/site.com Fill out the info the next step asks.

I was running into an issue where when people would go to the IP of my server or a domain was pointed at my server and the domain wasn’t configured in NGINX it would for some reason redirect to one of my domains when I didn’t want it to. Below is the config block that I added to a file. This make NGINX return a 403 error when accessing the server via IP or an reconfigured domain.

Over the past couple days I’ve been trying to get a Cisco 3560 with VLANs to work. Finally I was able to get it working. This is my first blog post FYI it’s not the most detailed. It’s just info on what I’ve learned. This is not the best post to read if you have no technical knowledge. If you have some you should be able to work your way thru my horrible instructions.